Neptune Apex Available soon

[7044scott]

Hi I have my lights set to come on every day from 4pm till 11pm I would like to know how I can run them at ten% on the weekends from 8am till 4pm

[Aquanet]

Set up the Apex this weekend for a test run,
Great little unit, had the webserver up in 30mins.

One thing i found is that it is not easy to program like the GHL. still trying to get my head around it, But they have a great manual.


Who has signed up for Fusion? looks like it is open to test, but only a few a day can get access.
http://www.neptunesystems.com/apex-fusion-beta/

[ggoosen]

I am an apex fusion beta tester, you can sign up but it's unlikely that you will why an invite , I know many users are asking for access on the Neptune forums


Sent from my iPhone using Tapatalk

[Aquanet]

?? You don't need a invite. It's now open , but they are limiting it daily.

[ggoosen]

?? You don't need a invite. It's now open , but they are limiting it daily.

[Aquanet]

Reeftronics is cool, sends me email if my Apex is down.

https://www.reeftronics.net/

[Aquanet]

How do you telnet into the apex?

i have the eb6 bar but it will not read the amps as it will need to be reset.

[ggoosen]

How do you telnet into the apex?

i have the eb6 bar but it will not read the amps as it will need to be reset.

open cmd prompt from a pc attached to your network by doing the following
Start > run > cmd

once command prompt is open,

type in

telnet <ip address of your apex"

eg

telnet 192.168.0.100


that will telnet you to the base unit, once in there follow instructions as needed.

Be careful though telnet is a last resort, and has the ability to reset and or brick your apex unit.

I suggest you read through the comprehensive user guide found Here > http://www.neptunesystems.com/wp-content/uploads/2013/11/Comprehensive-Reference-Manual-.pdf

[Aquanet]

i can get into dos, but i get to this

c:\users\hp>

when i add telnet 192.168.2.101 it comes up with error message.


anyhow, the amp reading is working, not sure how, i had to move the apex and when i reconnected it started to work when i connected a large pump, so all good

[chromus]

You need to have telnet installed on the machine (its not standard on Home editions) Pro and Ult usually install it by default

[ggoosen]

You need to have telnet installed on the machine (its not standard on Home editions) Pro and Ult usually install it by default

[Aquanet]

You need to have telnet installed on the machine (its not standard on Home editions) Pro and Ult usually install it by default

Oh, they don't make it very clear in the manual.

[Aquanet]

where is the best place to get float switch's for the Apex?

[chromus]

If they are just float switches and dont need a wiring harness

http://www.buyincoins.com/s/float-switch.html

[Aquanet]

Very quite in the Apex world?

Got mine up and running, great unit. The App is pretty fast on the android phone.
Nice web Graphs on reeftronics

[NewyReefer]

Is anyone running fusion yet..? i got my invite but cannot generate a token..??

[NewyReefer]

.

[Aquanet]

Yep, been running for a week,
Token should come up on the standard dashboard

[NewyReefer]

Yea I ended up getting it but I had to get it from the apex display. ..

Also I have updated the firmware but fusion is saying it's not the latest and there is nothing on my fusion dashboard. ?

[Aquanet]

Try the neptune support, they are pretty good

[NewyReefer]

Thanks mate will give that a go...

[Aquanet]

Been playing with Fusion, found that you can view other controllers if they load you as view.

pretty cool, but you have to have Fusion.

[NewyReefer]

Yea I have seen that you can authorize other people to view and receive warning emails pretty handy....

[Aquanet]

sent you a PM

[NewyReefer]

Sounds good mate.

I did try and reply but it said you were unable to receive pm's

[Aquanet]

try again

[NewyReefer]

Got fusion sorted thanks to Aquanet and apex support now is working well.

So good to be able to view and control it outside of my network, also can do it with other peoples Apex would be very handy when your away getting someone else to keep a eye on it.

[Aquanet]

Good it works.

Who else is using Fusion?

[ggoosen]

Good it works.

Who else is using Fusion?

Me


Sent from my iPhone using Tapatalk

[NewyReefer]

Has anyone got there Apex linked to Aquaticlog..??